The IMAX 8B is the latest incarnation from the IMAX range. It comes with all the features of the B6 but in a mega 8 cell charging capacity package!
Charge all your favourite packs including A123s (LiFe) as well as balance, cycle and discharge.

Spec.
Operating voltage range: 10.0~18.0Volt
Circuit power: max. 150W
Charge current range: 0.1~7.0A
Discharge current range: 0.1~5.0A
Current drain for balancing Li-Po: 300mAh/cell
NiCd/NiMH battery cell count: 1~27 cells
Lithium bettery cell count: 1~8 Series
Pb battery voltage: 2 to 36V
Weight: 574g
Dimensions: 170X110X35mm

The IMAX B6 is a very advanced charger, able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries.  P = 3,900.00 in stock free shipping

Features;
Microprocessor controlled
Delta-peak sensitivity
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.

Spec.
Input Voltage: 11~18v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 580Dimensions: 133x87x33mm

Imax b5 charger = P=2,9500in stock free shipping 1. Voltage balancer for Li-polymer battery inside B5 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lipo battery for cell balancing. 2. Maximum safety A. Delta-peak sensitivity: The automatic charge termination program works on the principle of the Delta-peak voltage detection. B. Capacity limit: The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value. C. Processing time limit: You can also restrain the maximum process time to prevent from any possible defect. D. Input power monitor: To protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops blew the lower limit the process will be ended automatically. 3.High-power and high-performance circuit B5 employs the circuit that has maximum output power of 50W. As a result it can charge up to 14 cells of NiCd/NiMh and 5 series of Li-Poly batteries with maximum current of 5.0A. Both of these functions are used to protect your battery far away from damage. IMAXB5 can make sure your battery work effectively and maximize the life-span of your battery at the same time.